short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• If your program logic depends on any of that additional code, you should probably avoid short-circuiting operators.
  如果程序逻辑依赖于任何这些附加代码，您可能应该避免使用短路运算符。
• A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
  为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
• The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
  不同工艺条件下的焊接质量的好坏，肯定会反映在与焊接过程本身固有的焊接工艺参数上，如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
• Detection and Analysis on the arc energy of short-circuiting co_2 arc welding
  短路过渡CO2焊电弧能量的检测与分析
• Based on the research of reason of splatter generating in the process of short-circuiting transfer, it tries to control the splatter of CO2 welding by longitudinal magnetic field.
  在研究短路过渡飞溅产生原因的基础上，初步尝试了用纵向磁场来控制CO2气体保护焊飞溅。
• The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
  分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。
• The Finnish phone maker has received around 100 reports of its phones short-circuiting while being charged.
  芬兰手机制造商已经收到大约100份由于手机短路而被起诉的报告。
• According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
  在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
• Multivariate statistical process control for on line monitoring of short-circuiting GMAW
  短路GMAW焊在线质量监测的多变量统计过程控制方法
• In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
  为综合考虑这些参数的影响，以特征参数综合值来描述和实时评判CO2焊接短路过渡过程，得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。